Baldor Reliance Industrial Motor - 10 HP

The CEM3711T is a 10 HP Baldor electric motor with a totally enclosed fan cooled enclosure. It produces a maximum speed of 3490 RPM. Its 215TC frame is constructed with heavy duty steel. Features a direct on line starting method typically used with 3-phase motors. Designed to meet NEMA standards and handle general purpose applications.

CEM3711T Specifications:

• Catalog Number: CEM3711T
• Enclosure: TEFC
• Frame: 215TC
• Frame Material: Steel
• Frequency: 60.00 Hz
• Output @ Frequency: 10.000 HP @ 60 HZ
• Phase: 3
• Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
• Voltage @ Frequency:
• 460.0 V @ 60 HZ
• 230.0 V @ 60 HZ
• XP Class and Group: None
• XP Division: Not Applicable
• Agency Approvals:
• UR
• CSA EEV
• CSA
• Ambient Temperature: 40 °C
• Auxiliary Box: No Auxiliary Box
• Auxiliary Box Lead Termination: None
• Base Indicator: Rigid
• Bearing Grease Type: Polyrex EM (-20F +300F)
• Blower: None
• Current @ Voltage
• 11.600 A @ 460.0 V
• 23.200 A @ 230.0 V
• 24.900 A @ 208.0 V
• Design Code: B
• Drip Cover: No Drip Cover
• Duty Rating: CONT
• Efficiency @ 100% Load: 90.2 %
• Electrically Isolated Bearing: Not Electrically Isolated
• Feedback Device: NO FEEDBACK
• High Voltage Full Load Amps: 11.6 a
• Front Face Code: Standard
• Front Shaft Indicator: None
• Heater Indicator: No Heater
• Insulation Class: F
• Inverter Code: Inverter Duty
• KVA Code: G
• Lifting Lugs: Standard Lifting Lugs
• Locked Bearing Indicator: Locked Bearing
• Motor Lead Exit: Ko Box
• Motor Lead Termination: Flying Leads
• Motor Lead Quantity/Wire Size: 9 @ 14 AWG
• Motor Type: 3730M
• Mounting Arrangement: F1
• Number of Poles: 2
• Overall Length: 18.63 IN
• Power Factor: 88
• Product Family: General Purpose
• Pulley End Bearing Type: Ball
• Pulley Face Code: C-Face
• Pulley Shaft Indicator: Standard
• Rodent Screen: None
• RoHS Status: ROHS COMPLIANT
• Service Factor: 1.15
• Shaft Diameter: 1.375 IN
• Shaft Extension Location: Pulley End
• Shaft Ground Indicator: No Shaft Grounding
• Shaft Rotation: Reversible
• Shaft Slinger Indicator: No Slinger
• Speed: 3490 rpm
• Speed Code: Single Speed
• Motor Standards: NEMA
• Starting Method: Direct on line
• Thermal Device - Bearing: None
• Thermal Device - Winding: None
• Vibration Sensor Indicator: No Vibration Sensor
• Winding Thermal 1: None
• Winding Thermal 2: None

Features:

• Pressure cast aluminum end plates with ribbed design for rigidity
• Ball bearings
• Locked drive end bearing
• Heavy gauge steel frame

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).