Aluminum Crankcase Plunger Pump with Gas Flange, Coupler, and Unloader

The Giant Pumps P319LG2EUT is an American-made positive displacement pump for direct or belt driven applications. This triplex plunger high pressure pump has reciprocating plungers and an aluminum crankcase with a sight glass and a vented dipstick. This P319 model is mounted on the left side and includes a flange for gas motors over 9 horsepower and a 1" aluminum coupler. It comes with an unloader and a thermal pop-off device.

Choose quality Giant products for your car washing systems, pressure washing business, and other high pressure applications.

Specifications:

• 3450 RPM
• Max Flow: 4.8 GPM; 18.2 L/min
• Nominal Pressure: 2500 PSI; 170 bar
• Power Consumption (Nominal): 8.3 hp; 6.2 kW
• Intermittent Pressure: 2750 PSI; 190 bar
• Power Consumption (Intermittent): 9.1 bhp; 6.8 kW
• Max Temperature: 160 °F; 70°C
• Plunger Diameter: 0.71"; 18mm
• Stroke: 0.31"; 8.0 mm
• Max Inlet Pressure: 145 PSI; 10 bar
• Crankshaft Diameter: 0.94"; 24 mm
• Oil Capacity (short): 14.2 fluid ounces; 0.42 L
• Oil Capacity (extended): 17.0 fluid ounces; 0.5 L
• Weight: 16 lbs; 7.3 kg
• Inlet Ports:(2) 1/2" BSP
• Discharge Ports: (2) 3/8" BSP
• Crankshaft Rotation: Top of Pulley Towards Manifold
• Shaft Mounting: Left
• Gas flange over 9 HP
• 1" aluminum coupler
• Made in the U.S.A.

Component Materials:

• Forged brass manifold
  
• Solid ceramic oxide plungers
  
• High grade stainless steel valves
  
• Nitrile with fabric reinforcement seals
  
• Aluminum die-cast gear end

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm (For more information go to www.p65warnings.ca.gov).